SLS 3D Printing Service in Nylon PA 12

From 3D design to SLS print to finished part

SLS printed parts in white Nylon PA 12, produced on an EOS FORMIGA P 110 Velocis and finished in a DyeMansion Powershot DUAL. One process, one material, made in the Czech Republic for customers across Europe and worldwide.

This page in other languages: Česky · Deutsch

What you get

SLS Market is an SLS printing service with a narrow scope. We run one industrial laser sintering system, one material and one finishing line, and we name them. You know which machine builds your part and where.

  • Functional nylon parts. Laser-sintered PA 12 is a production-grade thermoplastic. It is used for housings, brackets, clips, jigs and fixtures, gripper fingers, ducts and small-series end-use parts.
  • No tooling and no support structures. The surrounding powder supports the part during the build. Undercuts, internal channels and lattice structures do not add tooling cost.
  • Parts finished for use. Every order is depowdered, blasted and polished. Dyeing is available as an option.
  • One part or a series. The same process covers a single prototype and repeat batches of the same geometry.

If you are still deciding whether the process fits your part, start with the guide What is SLS 3D printing.

Machine and material

EOS FORMIGA P 110 Velocis laser sintering system

Parts are built on an EOS FORMIGA P 110 Velocis, an industrial laser sintering system with a build volume of 200 x 250 x 330 mm. A CO2 laser fuses thin layers of polyamide powder; the part is built inside a heated powder bed.

The material is Nylon PA 12 in white. PA 12 combines stiffness with enough ductility for snap-fits, has low moisture absorption compared with other polyamides and resists oils, greases and many common chemicals. The PA12 nylon guide covers the properties and limits in detail.

ItemSLS Market
ProcessSelective laser sintering (SLS), powder bed fusion
MachineEOS FORMIGA P 110 Velocis
Build volume200 x 250 x 330 mm
MaterialNylon PA 12 (polyamide 12), white
FinishingBlasting and surfacing in a DyeMansion Powershot DUAL
ColorNatural white or dyed in 61 TCN colors, see color catalog
LocationCzech Republic

Finishing and dyeing

DyeMansion Powershot DUAL blasting system

A part taken out of the powder bed is covered in loose and partly sintered powder. Finishing decides how it looks and feels in the hand.

  • Blasting and surfacing. Parts are processed in a DyeMansion Powershot DUAL. The system does not color parts; it removes residual powder and evens out the surface in an automated, repeatable cycle, so parts from different batches receive the same treatment.
  • Dyeing. Dyeing is a separate, optional step after blasting. White PA 12 takes dye well. The dye penetrates the surface layer, so the color does not chip like a coating and does not change the dimensions of the part. We use liquid dyes from the dye maker TCN; all 61 shades of the color catalog are priced instantly in the calculator. Black and orange are in stock and ship with the standard lead time; any other color adds about one month (20 working days) because the dye is ordered for you.

The surface of a blasted SLS part is matte and slightly grainy; polishing (included) makes it smoother. It is not glossy and not transparent.

We do not offer chemical or vapor smoothing. Our finishing is blasting and polishing in the DyeMansion Powershot DUAL, included in the price, plus optional dyeing with TCN dyes. Vapor smoothing of PA 12 exists as a separate process at other providers, but it is not part of our service.

Design limits

The values below are typical design guidance for laser-sintered PA 12. They describe what the process usually achieves and are not a guarantee for a specific geometry. Tell us about critical features in your request.

FeatureTypical guidance for SLS PA 12
Maximum part sizeMust fit the 200 x 250 x 330 mm build volume with margin
General tolerance±0.3 %, lower limit ±0.3 mm
Layer thicknessAround 0.1 mm is common for the process
Minimum wall thicknessAbout 0.8 to 1.0 mm; thicker for large or load-bearing walls
Minimum hole diameterAbout 1.5 mm, larger for deep holes so powder can be removed
Clearance between moving partsAbout 0.5 mm for assemblies printed in place
Powder escape holesAt least two holes of about 4 mm or more in hollow parts
Engraved or embossed textAbout 1 mm depth or height, sans-serif, bold
Large flat surfacesProne to warping; add ribs or curvature

How ordering works

  1. Get an instant price. Upload STEP or STL files to the calculator: it checks that each part fits the build chamber and prices it with the finish, optional dyeing and the delivery speed you choose. Your files stay in your browser.
  2. Send for confirmation. Send the order preview from the calculator. We check the geometry for printability, confirm the binding price and delivery date and agree shipping and payment with you.
  3. Production. After your confirmation the parts are nested into a build, printed, cooled, depowdered, blasted and polished and, if ordered, dyed.
  4. Shipping. Parts are shipped from the Czech Republic.

Something the calculator cannot price, such as another material or technology, an NDA or a large series? Write to us; for design help and prototype development see prototype.builders.

When SLS is the wrong choice

We would rather tell you before you order. SLS PA 12 does not suit parts larger than the build volume that cannot be split, transparent or glossy parts, metal parts, or parts that need a molded-quality surface straight from the machine. For a comparison with the closest alternative process, see MJF vs SLS.

Frequently asked questions

Which material and machine do you print with?

We print Nylon PA 12 (polyamide 12) in white on an EOS FORMIGA P 110 Velocis laser sintering system. Parts are then blasted and surfaced in a DyeMansion Powershot DUAL. We do not offer other processes or materials.

How large can an SLS part be?

The build volume of the EOS FORMIGA P 110 Velocis is 200 x 250 x 330 mm. A part has to fit inside this volume with some margin. Larger designs are usually split into sections that are joined after printing.

What accuracy can I expect from SLS parts?

The typical general tolerance for laser-sintered PA 12 is ±0.3 %, with a lower limit of ±0.3 mm. This is the usual convention for the process, not a guarantee for every geometry. If a dimension is critical, mark it in your request so we can discuss orientation and inspection.

Can SLS parts be colored?

Yes. The parts come out of the printer white, which makes them a good base for dyeing. Dyeing colors the surface layer of the part in a dye bath. Dyeing is a separate step after blasting, with liquid dyes from the dye maker TCN. All 61 colors of the catalog at sls.market/colors are priced instantly in the calculator. Black (GTD 8485) and orange (GTD 8645) are in stock and ship with the standard lead time; any other color adds about one month (20 working days).

Do you offer chemical or vapor smoothing?

No. Chemical (vapor) smoothing is not part of our service. Every part is blasted and polished in a DyeMansion Powershot DUAL, which is included in the price, and can optionally be dyed with liquid dyes from the dye maker TCN. The result is a clean, even, matte surface. Vapor smoothing of PA 12 is offered as a separate process by other providers; we do not offer it.

How do I get a price?

Upload your STEP or STL files to the instant calculator at sls.market/calculator: the price appears in seconds. It depends mainly on part volume, bounding box, quantity, dyeing and the delivery speed; blasting and polishing are included.

Is there a minimum order quantity?

No. SLS needs no tooling, so a single part can be produced the same way as a series. Unit cost falls with quantity because more parts share one build.

Get an instant price

Upload STEP or STL files to the calculator and see the price of your parts in seconds: white Nylon PA 12, blasting and polishing included, optional dyeing in 61 colors, three delivery speeds. From there you send the order preview for confirmation.

Another material, an NDA or a large series? Write to us. For design help and prototype development see prototype.builders.

Get an instant price